SD Card is an external storage drive that comes in handy; it allows easy saving, transferring, and deleting of data files. But sometimes, an sd card won’t format when attempting to clear all available files.
When this happens, you’d be confused as to if the SD Card is still useful or useless since you cannot access or delete your files, especially after several attempts.
The Tenorshare 4DDiG solution is the most efficient way to format an SD Card that has either been corrupted, damaged, inaccessible, or now exists in RAW even after refusing to be formatted on an Android or Windows device. But before we get into the “How to use” segment for the Tenorshare solution, let’s find direct reasons why your SD Card might refuse to format.
Part 1: Direct Reason – Why I Can’t Format SD Card？
When you try to format your SD card and instead of a successful operation, you get a prompt message like “Unable to format SD Card,” “Windows was unable to format SD Card,” or “SD Card not formatted error”; one of to the following is likely to be occurring:
- An SD Card with bad sector(s)
- SD Card becomes write protected so that you can add or delete files from it.
- SD card gets corrupted with Malware Virus
- The SD Card file System contains errors that your device cannot fix.
So if your SD Card runs into any of these problems and needs to be formatted, read the next segment on all possible solutions to fixing it.
Part 2: How to Fix SD Card Won’t Format?
These five methods fix an “SD Card won’t Format” scenario.
Solution 1: Format SD Card using CMD
To format an SD Card with CMD means to use a specific command prompt to format the disk. To begin, follow these three easy steps:
Step 1: Use the search toolbar to find them and select the Command prompt option by typing “cmd” in the search bar. Or launch by right-clicking on the start menu.
Step 2: Type “Diskpart” in the next window, then tap the “enter” button.
Step 3: Finally, type in the following commands in this order:
- List disk
- (Tap Enter)
- Select disk # (the number assigned to the disk)
- (Tap Enter)
- List partition
- (Tap Enter)
- Select partition #(the number assigned to the disk)
- (Tap Enter)
- Format fs=ntfs quick
Solution 2: Remove Write Protection on SD Card
Write Protection errors occur when your device can only read data but cannot make changes. This method removes write protection, follow these steps:
Step 1: Tap and hold the Windows + R key simultaneously to launch Run Box.
Step 2: Type the “diskpart” command and the “Enter” key.
Step 3: A new window will open, after which you should enter the following commands.
- List disk/
- Select disk #
- Attributes clear read-only
Solution 3: Format SD card from Windows Disk Management
The Windows devices come with built-in partition disk management. It can be for formatting an SD Card and creating and deleting partitions, among other known functions. To use Windows built-in partition manager to format SD Card, follow these steps:
Step 1: Launch the Windows built-in Manager by either selecting the app from the window start menu option or by combining Windows + the “R” key, followed by typing the command “diskmgmt. msc” to open.
Step 2: Select all or the specific partition on the SD Card you would like to format, click right to view the option, and select format to begin.
Step 3: By default, the process is a quick format, but you can uncheck the option in the pop-up box and select “Ok” to make the process a complete format.
Solution 4: Find the SD card by changing the drive number and path
Step 1: Connect your “SD Card that won’t format” to your computer.
Step 2: From Manage > Disk Management, right-click “This PC” and select “Manage.”
Step 3: Locate your SD card and select with the right mouse click > Change drive letter > Paths.
Step 4: Choose a different drive letter for your SD card and click “OK.”
Solution 5: Format SD card Using Third-party SD Card Formatter
If you have tried any of the above-described solutions but are still stuck in the “SD Card Won’t Format” scenario, you can opt for a Windows third-party SD Card Formatter to provide a final and lasting solution. Or better still, avail yourself of the trouble, search online and use a trusted third-party SD Card formatter software apps.
Bonus Tips: How to Recover Data from SD Cards That Won’t Format via Professional Data Recovery Software?
One software guaranteed to provide the all-in-one solution for SD Cards that won’t format is Tenorshare 4DDiG, built with high efficiency and modern tech to provide deep scan and complete/partial scan of SD Cards. Follow these easy-to-use steps to get started.
Check out the fantastic features that qualify it to stand out:
1. It is fast, easy to use, and 100% Secure for SD Card that won’t format
2. It can efficiently recover lost data before formatting an SD Card, unlike other methods of fixing an SD Card that won’t format.
3. The Tenorshare can help windows unable to format sd cards, as well as Mac devices.
4. It works perfectly for all variants of SD Card– Mini, Micros
5. It can be used to recover all kinds of files, such as photos, videos, documents, audio, and so on.
Step 1: Download and Install the Tenorshare 4DDiG software, connect your SD Card, allow the 4DDiG software to run, then click on “Start”.
Step2: Click on “Scan” to preview the data you want to recover before formatting the SD Card.
Step 3: Preview and Recover the lost files from the SD Card. Format the card or delete files as you see fit. However, do not save newly recovered files in the same folder as before.
Part 3: How to Prevent SD Card Errors?
Do you know you can prevent the “SD Card won’t Format” scenario?
You can take preventive measures to eliminate SD Card file system errors. The list is endless, but here are the major ones to note:
- Format new SD Card before use
- Avoid using the same SD Card on multiple devices
- Due to its volatile nature, format SD Card periodically instead of deleting files.
- Use the Eject option before safely removing the SD Card from your computer.
- Turn off devices like Camera and Android before removing SD Card
The SD Card is handy for mobility in transferring data. However, due to usage, you might need to clean, and clear out files periodically. To do this, get try any of the possible like: using CMD, removing write protection, or a reliable third-party software – the Tenorshare 4DDiG is highly recommended as it is secure and reliable to format and even recover files from corrupted SD Cards.